Back to Uncategorized

Precor Discovery Seated Leg Curl – Current & Latest Model

Precor Discover seated leg curl. This is the current and latest model available by Precor. This machine is in beautiful condition and retails for more than $5,000.
Units have fully shrouded weight stacks in full compliance with ASTM and EN standards.
Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
Premium-quality 3D urethane molded-foam padding for maximum comfort. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Automotive-grade, two-textured fabric features double top stitching on all seams.
Adjustable Seat:
Yes, gas-assisted ratcheting seat adjustment
Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps.  Adjustment points are highlighted with a contrasting color for ease-of-use.
Instructional Placard:
Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.  QR codes provide quick and easy video instruction from your smart phone or Preva app.
Bearings and Pivot Points:
Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning.  Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings.  Bolts are grade 5 or above in all applications.
Water Bottle and Accessories Holder:
The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.
Pulleys and Cables:
Glass-fiber-reinforced nylon pulleys for durability, with precision motor-grade ball bearing pulleys. Cable consists of 3/16 inch (7″x19″) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch and coated to 3/16 inch. The cables conform to specification MIL-W-83420D-BARE cable only. When used, redirection pulleys route cables close to frame to minimize chance of external interference.
Frame and Finish:
The frame is 11 gauge (.120 in) 2×4″ electroweld steel racetrack tubing. Movement arms are made of electroweld steel round tubing. The five-stage material prep/wash process if followed by an electrostatically applied, heat-cured powder coat.
Bolt Down Capability:
General Features:
Knee pad moves with user’s lower legs; no thigh hold-down pad required. Start position and roller pads adjust for optimal exercise mechanics.
Incremental Add-on Weight
5 lbs. (2.3 kg)
Weight Stack
240 lbs. / 109 kg
Workout Area (L x W)
66 L x 50 W inches / 168 L x 127 W cm
Equipment Dimensions and Weight
61 inches / 155 cm
49 inches / 125 cm
Equipment Weight
594 lbs. / 269 kg
59 inches / 150 cm
Shipping Dimensions and Weight
Shipping Weight
645 lbs. / 293 kg